If you are bothered by the setup process of the Netgear Extender and are looking for an easy way to complete the setup process, you are at the best place. Here you will find the easiest solutions for the Netgear Extender Setup using different methods.
Some things shall be taken care of before starting the setup process. These things or precautions will help you in completing the setup without any issues. So the following are the essential requirements for the Netgear Extender Setup:
So firstly, you need to place your Netgear router in the same room where your home router is placed.
Make sure that your router is getting the proper amount of power supply.
And you also need a workable home WiFi network.
We would also suggest you keep at least two popular web browsers installed and running on your computer. It is so because sometimes, some particular web browser can create login issues in the router. Thus, to solve such a situation, you have to keep another web browser handy.
So these were the precautions that could prevent you from any issues while doing the setup. So now, let’s start the setup.
Table of Contents
The Netgear Extender Setup via Mywifiext
Now there are two different methods that you can use to do the Netgear Extender Setup. The first one is the Manual Method, and another is the WPS method. So in the following sections, you will find the easy steps to complete the setup process by both methods.
And first, we are going to start with the Manual Method.
The Netgear Extender Setup via Manual Method
You have to use a web browser to set up the Netgear Extender via the Manual Method. And therefore, this setup process is also called the web browser setup process. So the stick to the following steps to set up the Netgear Extender Manually:
- Foremost, you need to power on your extender. So plug the extender into a power outlet.
- Next, you need to connect your extender with your WiFi device.
- Now open the Network Manager tab of your device and connect the Netgear_ext SSID network.
- Then open the web browser of your choice on your device.
- And open the default mywifiext login web page on the internet.
- Now you have to create a Netgear account on this page. In case you don’t have one already.
- After creating the account, you need to select the WiFi network you would like to extend.
- Then tap on the Next
- And at last, you need to select the Finish button to end the setup process.
Thus, you have completed the extender setup. And once you complete the setup process, you can place the Netgear extender anywhere you like. And after completing the setup process, you can easily connect to the Netgear_ext (SSID) network anywhere in your home.
The Netgear Extender Setup via WPS Method
The setup process of the Netgear Extender via the WPS method is easier than the manual method. Or you can also say that this is the easiest process for the Netgear extender setup. So follow these steps to set up the Netgear Extender using the WPS method:
- Foremost, you need to power on your extender. Connect the extender to a power outlet to power it on.
- Then, you need to find and press the WPS button of your router.
- When you press the WPS button, you will see the router’s LED light turning solid green. This confirms that your router has been configured with your router properly.
- You need to repeat all the above steps for a dual-band range extender as well.
- Now you need to connect to the extender’s network. And you need to use the same password to connect to the extender you are using to connect to the router.
- There will also be an option to check the WiFi extender manual for the default username and password.
And following these steps, the Netgear range extender setup process is complete. You are now free to connect your device to the extender Netgear_ext SSID network and enjoy an uninterrupted internet connection in every corner of your home.
And if you experience any issues doing the setup with the above-given steps, feel free to contact Netgear Customer support.
Now, what you will do if you don’t have an ethernet port.
How can you do the Netgear Extender Manual Setup without An Ethernet Port?
So there are some Netgear Extenders in the market which don’t come with an Ethernet port. And users experience issues while setting up such extenders.
But if you have an extender without an ethernet port, do not worry. You can manually setup your extender without using the ethernet port with the following steps:
- So foremost, you need to reset your router to its default factory settings.
- Once you reset the extender, you need to connect your device to the extender’s WiFi connection.
- Then login to the website through your device’s web browser.
- If you are logging in for the first time, or if you have not changed your login credentials since you bought the router, you need to use the default login credentials for logging in.
- Next, you will see a setup wizard. You need to follow the steps given by the Setup wizard to establish a connection with your existing router.
- And lastly, you need to connect your WiFi-enabled device with the extender’s network. The extender’s network is most probably named Netgear_ext (SSID).
- And thus, you can successfully set up the Netgear Extender without using the ethernet port.
In case you experience any issues, feel free to connect to the Netgear Customer support.
Conclusion
We have listed all the essential steps for the Netgear Extender Setup in this guide. If you stick to the steps given in this guide, you won’t experience any issues while doing the setup. However, you are free to connect to Netgear Customer support in case you experience any issues. For more tech related articles check knowtechmag.
